Construction Equipment Hauling

Great Western Transportation coordinates construction equipment hauling nationwide for contractors, equipment dealers, and rental companies moving excavators, dozers, cranes, and other heavy machinery between job sites, dealer lots, and yards. Unlike freight that ships in boxes or on pallets, construction equipment is its own commodity category: it is oversize or overweight by default, it is often self-propelled, and it usually requires a specialized open-deck trailer rather than a standard flatbed. This page explains why construction equipment needs this kind of hauling, what trailer types apply to which machines, and what Great Western needs to plan a shipment.

Why Construction Equipment Requires Open-Deck Hauling

Most heavy construction machines cannot move in a dry van or on a standard flatbed without exceeding legal size or weight limits. An excavator, wheel loader, or dozer is typically taller, wider, and heavier than the cargo dry van and standard flatbed trailers are built around, and many machines also drive under their own power rather than being forklifted or craned into place. That combination — bulk, weight, and self-propelled loading — is what defines the flatbed and heavy-haul segment of trucking and separates it from van freight.

The scale of the equipment fleet behind this freight is substantial. The global construction equipment market was valued at roughly $167–172 billion in 2025 and is projected to keep growing at a mid-single-digit compound annual rate through the next decade, with North America accounting for a meaningful share of that demand.[1] That equipment does not stay in one place — it moves between dealers, rental yards, and active job sites throughout its working life, and each of those moves is a candidate for flatbed, step deck, or RGN transport rather than standard freight.

Federal weight rules reinforce why this equipment needs specialized handling. The standard maximum gross vehicle weight on the Interstate System is 80,000 pounds, with axle weight further limited to 20,000 pounds on a single axle and 34,000 pounds on a tandem axle group under the federal bridge formula.[2] A loaded excavator or dozer routinely exceeds these limits on its own, which is why heavy equipment moves are planned around permits, axle spacing, and trailer configuration rather than treated like ordinary freight.

Equipment Commonly Hauled

  • Excavators — tracked and often too heavy or wide for a standard flatbed once counterweights and buckets are factored in; typically moved on a lowboy or RGN trailer that keeps deck height low enough to stay within legal height limits.[3]
  • Bulldozers — heavy, tracked, and usually driven or winched onto the trailer; commonly hauled on an RGN because the removable gooseneck creates a ground-level ramp for self-loading tracked machines.[3]
  • Mobile cranes — often the tallest and heaviest unit in this category, frequently requiring disassembly of the boom or counterweights and a multi-axle RGN or specialized heavy-haul trailer to distribute weight legally.
  • Backhoes and skid steers — smaller and lighter than excavators or dozers; these often fit within standard flatbed or step deck height and weight limits, so a step deck is frequently sufficient.
  • Wheel loaders — wheeled and self-propelled, generally loaded via ramp; a step deck works for lighter models, while larger loaders move on a lowboy or RGN once height or weight exceeds step deck limits.
  • Motor graders — long and wheeled, typically driven onto the trailer; a step deck is common unless the blade or frame width pushes the load into oversize territory.
  • Compactors and rollers — comparatively compact and heavy for their size; usually within step deck weight capacity (commonly up to roughly 43,000 lbs) but occasionally require a lowboy if weight runs high relative to footprint.[3]

Click Here for a Flatbed Shipping Quote

Choosing the Right Trailer for Construction Equipment

Trailer selection for construction equipment comes down to three questions: how tall is the loaded machine, how much does it weigh, and how does it get on and off the trailer. A standard flatbed or step deck can often handle equipment that is wheeled, drives on under its own power via ramp, and stays within legal height — most states cap vehicle height between 13’6″ and 14′, with 13’6″ the most common limit and some states allowing up to 14’6″ or, in Alaska, 15′.[4] Once a machine’s height on a standard deck would exceed those limits, a step deck’s lower deck height, or a double drop / lowboy’s even lower deck height (as little as 18 to 24 inches off the ground), becomes necessary to keep the overall load height legal.[3]

Weight follows a similar logic. Step decks generally top out around 43,000 lbs of cargo capacity, while lowboy and RGN trailers, built with multiple axles, can be configured to legally carry 40,000 to 80,000+ lbs depending on axle count and spacing.[3] RGN (removable gooseneck) trailers are the default choice for heavy tracked equipment like large excavators, dozers, and cranes because the gooseneck detaches and lowers to create a drive-on ramp at ground level, which is often the only practical way to load a crawler machine that cannot be driven up a ramp angle. Wheeled equipment that can climb a ramp — loaders, graders, some compactors — has more flexibility and can often move on a step deck if height and weight allow.

Permits and Routing for Oversize Construction Equipment

Oversize and overweight permits for construction equipment are issued at the state level, not federally, and requirements vary by state along the route. States set their own thresholds for when a pilot car or escort vehicle is required; general industry practice puts the first escort requirement around 12 feet of width, with two escorts typically required above roughly 14 to 16 feet wide, though the exact trigger point differs significantly by state — Arizona requires an escort starting at 11’1″ while Montana does not require one until 16’7″.[5] Height and length can also trigger escort requirements, commonly in the range of 14 to 15 feet of height and 90 to 150 feet of length.[5] Because thresholds and permit processes vary state by state, GWTrans reviews each route against the specific states it crosses before dispatching a truck rather than assuming a single national standard applies.

Planning Considerations for a Construction Equipment Shipment

A few details determine how smoothly a construction equipment shipment goes. Accurate dimensions and weight matter most: if a machine’s size or weight is reported incorrectly, the wrong trailer can be dispatched, a needed oversize or overweight permit can be missed, and the result can be a delay, extra charges, or in some cases a cancellation. Most long-haul trucks do not carry their own forklift, so equipment that does not drive on and off under its own power needs a clear loading and unloading plan at both ends — ramps, a crane, or a loader on site. A few days’ advance notice is generally preferable to a same-day request, since it gives more room to match the right truck and driver to the load. Permits are determined based on accurate dimensions and weight ahead of dispatch, so that information needs to be locked in early rather than adjusted after a truck is already assigned. Declared cargo value should also be provided upfront so the shipment is matched to adequate insurance coverage — a standard truck typically carries $100,000 in cargo insurance, and additional coverage can be arranged for higher-value machines. At delivery, a bill of lading is signed to document the equipment’s condition.

How Great Western Coordinates a Construction Equipment Shipment

Great Western Transportation coordinates construction equipment shipments by first reviewing the machine’s dimensions, weight, and loading method to determine whether a step deck, lowboy, or RGN trailer is the right fit. Every truck and driver is vetted for proper insurance, strong safety ratings, and a clean compliance record before being matched to a shipment. When dimensions or weight require an oversize or overweight permit, that permit is arranged in advance of dispatch rather than after the fact. Pickup and delivery appointments are scheduled directly with the shipper and receiver, and a bill of lading is signed at delivery to document the equipment’s condition. Great Western does not maintain a local terminal or fleet of lowboy trailers; shipments are coordinated through qualified, vetted carrier partners matched to the specific machine and route, and our team is available by phone for direct, personal service throughout the process.

Information Needed for an Accurate Construction Equipment Quote

  • Pickup and delivery ZIP codes
  • Equipment make and model
  • Exact length, width, and height, including attachments such as buckets, blades, or booms
  • Total weight (loaded and, if different, operating weight)
  • Whether the equipment is self-propelled and can be driven on and off under its own power
  • Loading method if not self-propelled (crane, forklift, ramp)
  • Declared cargo value
  • Pickup and delivery appointment windows
  • Site access notes — gate width, ground conditions, overhead clearance, ramp availability
  • Any known permit or escort requirements along the route

Frequently Asked Questions About Construction Equipment Hauling

What trailer is used to haul an excavator?
Most excavators move on a lowboy or RGN (removable gooseneck) trailer. The low deck height keeps the loaded machine within legal height limits, and the RGN’s detachable gooseneck creates a ground-level ramp that allows a tracked excavator to be driven or winched on directly.[3]

Does hauling a bulldozer require a permit?
It depends on the dimensions and weight once loaded on the trailer. States issue oversize and overweight permits individually, and each has its own thresholds for width, height, length, and weight, so a dozer that is within legal limits on one route may need a permit on another.[5] Exact dimensions and weight should be provided so this can be confirmed before booking.

How much weight can a lowboy trailer legally carry?
It depends on axle configuration, but lowboy and RGN trailers can typically be configured to legally carry 40,000 to 80,000+ pounds, compared to roughly 43,000 pounds for a standard step deck, because the additional axles distribute weight across more points on the road.[3]

Do all cranes and excavators need a pilot car escort?
Not always — it depends on the loaded width, height, and length, and the specific state’s threshold. As a general reference point, escorts commonly become required around 12 feet of width, 14 to 15 feet of height, or 90 to 150 feet of length, but exact triggers vary considerably by state.[5]

Does Great Western own its own lowboy trailers?
No. Great Western Transportation is a broker that coordinates construction equipment shipments through qualified, vetted carrier partners rather than operating its own fleet of lowboy or RGN trailers.

Sources

  1. Global construction equipment market size and growth projections — Global Market Insights, Construction Equipment Market Report and Grand View Research, Construction Equipment Market Analysis
  2. Federal maximum gross vehicle weight and bridge formula limits on the Interstate System — 23 CFR § 658.17, e-CFR and FHWA Freight Management and Operations, Bridge Formula Weights
  3. Trailer type, deck height, and weight capacity comparisons for heavy equipment (step deck, lowboy, RGN) — Lowboy vs Step Deck vs RGN for Excavator Transport, Beardown Logistics and What is a Lowboy Trailer?, O Trucking
  4. State-by-state legal vehicle height limits — Compilation of Existing State Truck Size and Weight Limit Laws, Appendix A, FHWA Freight Management and Operations
  5. Pilot car and escort vehicle thresholds by state — Pilot Car / Escort Vehicle Laws and Requirements By State, Oversize.io and When Are Escorts/Pilot Cars Necessary For Oversized Freight Shipments?, ATS

Request a Construction Equipment Hauling Quote

To get a quote for a construction equipment shipment, contact Great Western Transportation with the pickup and delivery ZIP codes, equipment make and model, dimensions, weight, and whether the machine is self-propelled. Photos and exact measurements help confirm the right trailer type and any permit requirements before a truck is dispatched.


Great Western Transportation
5000 Pleasanton Ave Ste 145, Pleasanton, CA 94566
Call Toll Free: 1-800-972-8484

Request a Quote — Contact Us Form →